Bitlomat 100 kit (2x radios) is an outdoor wireless bridge system operating in 5 GHz unlicensed frequency spectrum providing throughput up to 100 Mbps. The Bitlomat 100 is a compact and cost-effective wireless device that can be used as a point-to-point directional device in a bridge set-up, as a CPE in point-to-multipoint networks, or as a narrow-beam Base Station in a small point-to-multipoint set-up. The Bitlomat 100 embeds a 30 degrees beamwidth for interference mitigation, dual-polarized directional MIMO 2x2 antenna with a gain up to 16.5 dBi. Bitlomat 100 Bridge kit creates a transparent wireless bridge between two end points up to 5 miles. It supports multiple SSIDs, MAC addresses and DHCP across the wireless link. It has shielded hardware for spurious emission elimination. Moreover, it supports Service Level Agreement, Minimum guaranteed throughput per device (up and downlink), maximum throughput control per device (up and downlink), email notification in case of device failure, command line interface support, integrated OSPF and BGP, VLAN and Ethernet Port bonding support. The device can be configured in point-to-point application with CSMA (WI-FI standard protocol) or in point-to-multipoint network with Bitlomat proprietary TDMA protocol. With its password verification, MAC address authentication, SSID suppression and advanced WPA2 encryption, the system provides the best available wireless data security. Setup is easy in just 4 steps. There is no drivers or software that needs to be loaded to the computer. Bitlomat 100 bridge kit comes complete with all the electronics needed to set up a point to point wireless network bridge installation: including 2x Radio embedded with 16.5 dBi MIMO 2x2 antenna, 2x UV-rated plastic straps, 1x ESD-protected (+/- 15 KV) POE adapter and 1x power cord. The support is provided by email only. The user manual, firmware updates, and quick guides can be found on support.bitlomat.com

• Bitlomat 100 kit (2x radios) is an outdoor wireless bridge system operating in 5 GHz unlicensed frequency spectrum providing throughput up to 100 Mbps
• It complies with IEEE 802.11 a/n standards
• 30 degrees antenna beamwidth for interference mitigation
• Shielded Hardware for spurious emission elimination
• It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.

Bitlomat 100 kit (2x radios) is an outdoor wireless bridge system operating in 5 GHz unlicensed frequency spectrum providing throughput up to 100 MbpsBitlomat