Lensun 100W 12V Semi-Flexible Monocrystalline Solar Panel Kit with 10A MPPT Solar Charge Controller and Two 5m Cables with MC4 Connetors for 12V Charge Battery
Lensun 100W 12V Semi-Flexible Monocrystalline Solar Panel Kit with 10A MPPT Solar Charge Controller and Two 5m Cables with MC4 Connetors for 12V Charge Battery
30 Days Lowest Price Guarantee

Lensun 100W 12V Semi-Flexible Monocrystalline Solar Panel Kit with 10A MPPT Solar Charge Controller and Two 5m Cables with MC4 Connetors for 12V Charge Battery

$ 349.00

SIZE

100W Kit + 10A MPPT Regulator
100W
100W Kit + 10A PWM Regulator

DESCRIPTION

Lensun 100W 12V Semi-flexible Solar Panels:

NOTE: Please do not reverse bending flexible solar panel when you receive it and install it. Or the solar cells maybe damaged for stress concentration on the cells, and solar panel's output current will reduce.

- Electrical Information:
Peak power: 100W
Solar cell efficiency: 22%
Maximum power voltage: 17V
Maximum power current: 5.88A
Open circuit voltage: 20.06V
Short circuit current: 6.47A
Power allowance range: +/-3%
Maximum system voltage: 500V
Values at standard test conditions: Air Mass - AM1.5, Irradiance - 1000W/m2, Cell Temperature - 25°C

- Material Information:
Laminated for weather resistance
Laminated with Aluminium + ETFE + Silicon cell + EVA + Tedlar
Solar cells: Monocrystalline
Dimensions: 1100 x 570 x 2.5mm
Net Weight: 2.71kg
Back sheet: Aluminium
J-Box: IP 65 rated


10A 12V/24V MPPT Solar Charge Regulator:

- Panel of Controller:
Type: Household, not "time set" function
Temp: Temprature probe
Charge: Photo-electricity charging indicating(LED in GREEN)
Fault: Fault indicating(LED in RED)
Power: Load indicating (LED in GREEN) green LED on means there is output of the load
Mode: battery capacity percent indicating
Set: load switch


Two 5m 4mm2 Cables with MC4 Connectors:

One cable with female connetor, another cable with male connector.


Package Includes:

1x 100W Mono flexible solar panel
1x 10A solar charge regulator
2x 5m cable with MC4 Connetor
  • Made with Grade A Mono cells, up to 23% high output efficiency. It has the smallest size of all solar panels with the same wattage commercially available on the market today.
  • The panel uses a more expensive material (imported from Japan) called ETFE (Ethylene Tetrafluoroethylene) versus PET (Polyethylene terephthalate). The ETFE film layer absorbs light better with less reflection leading to more power per square inch.
  • Made of Aluminium back sheet. The ETFE material bonded with the Aluminium back sheet makes a stronger panel than a cheaper PET film one with less chance of cracking or water intrusion.
  • Highly stain-resistant and easily gets cleaned by the rain. Highly resistant to seawater corrosion. Waterproof and highly resistant to the harsh operating conditions of a marine environment.
  • Auto Switch charge, Mutiple electric protection: over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection.
Made with Grade A Mono cells, up to 23% high output efficiency. It has the smallest size of all solar panels with the same wattage commercially available on the market today.Sumyok

YOU MIGHT ALSO LIKE