MKS-TFT32 is a colorful touch screen LCD, it is suitable for many main board, such as MKS BASE, MKS GEN, MKS MINI, MKS SBASE, etc.
Don't like MKS TFT28, MKS TFT32 do not support external power supply, can't work with Ramps1.4.

Connect to MKS BASE,MKS MINI

Boot Setting
Step1: turn on MKS TFT32 at first time, then enter -> setting -> connection, select baud rate that the firmware use.
Step2: enter -> setting ->model, choose printer type, only Delta and other two options
Others: enter -> setting -> touch screen correction, improving accuracy.

Firmware Update
Copy the latest update firmware to SD card root directory, including:
1. mkstft32.bin.
2. mks_config.txt.
3. mks_pic.
Please do not adjust the file name. Insert SD card, it will update automatically after restarts.

WIFI Connection
1. MKS TFT can support MKS WIFI module.
2. After MKS TFT works with MKS WIFI module, can use Printrun, Repetier-Host to proceed remote connect and control. But it may make some functions unavailable.
mks_config.txt basic configuration
1. Configuration on single and double nozzle : change the value after the colon of "cfg_sprayer_counter" into the nozzle you need.("1"is single nozzle; "2" is double nozzle )
2. Heated bed configuration: change value after the colon of "cfg_custom_bed_flag" into custom requirements you need.("1" is with heated bed; "0" is without heat bed)

Package Include:
1 * 3.2'' Full Color Touch Screen MKS-TFT32 for 3D Printer

• 3.2 inch colorful touch screen, support U disk and SD card.
• Support continual and easy software update, support MKS Wifi module.
• No need to adjust firmware, support Marlin, Smoothieware and Repetier.
• Support keeping printing and saving of outage. Also exhausted material detection.
• Support boot logo and button customization, support user define function button.

3.2 inch colorful touch screen, support U disk and SD card.Gowoops