A USB C Car Charger as a gift for free with the package.

S9-13.0TH/s Specifications:
1. Miner version: S9-13.0TH/s
2. Chips version: BM1387
3. Chips Quantity: 189 PCS
4. Hash board Quantity: 3 PCS
5. Hash Rate: 13.0 TH/s±5%
6. Input voltage: 11.60~13.00 V
7. Input Current (12V DC input): 98A +10%
8. Input consumption (12V DC input): 1184W +10%
9. 220V consumption ( with AWP3+ power supply 93.5% efficiency, 25°C ambient temp): 1300 W +12%
10. Power Efficiency: (at the wall, with APW3+ power supply 93.5% efficiency, 25°C ambient temp): 0.1 J/GH +12%
11. Working Temperature: 0-40 ℃
12. Storage Temperature: -40-85 ℃
13. Working humidity: 5%RH-95%RH（None condensation）
14. Noise: 76 dB
15. Network: Ethernet
16. Dimensions: 350（mm）*135（mm）*158（mm）

Notes:
1.  Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
2.  There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
3.Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 10x PCIE connectors connected to power supply.

APW3+-12-1600 PSU
1600-Watt Power Supply, 93.8% Efficient, 205+ volt required, Includes 6 pairs of 6-pin PCI-E power connectors, 12 in total. Power cord is not included, please find one with at least 16A from your local market.

• Hash Rate: 13TH/s ±5%
• 220V consumption ( with AWP3+ power supply 93.5% efficiency, 25°C ambient temp) : 1300 W +12%
• Power Efficiency: (at the wall, with APW3+ power supply 93.5% efficiency, 25°C ambient temp) : 0.1 J/GH +10%
• Requires 10x 6 pin pci-e connectors.
• AntMiner APW3+-12-1600 PSU included (cannot be used in countries with a mains power voltage lower than 205V).

Hash Rate: 13TH/s ±5%Antminer