Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.
Product Specifications:
Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Includes custom shock mount & protective pouch
Product Specifications:
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise: 12 dB SPL
Dynamic Range (typical): 136 dB, 1 kHz at Max SPL
Signal-to-noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Weight 403 g (14.2 oz)
Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector: Integral 3-pin XLRM-type

• Audio-Technica Cardioid Condenser Microphone
• Pop Shield Universal Pop Filter Microphone Wind Screen with Mic Stand Clip
• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Switchable 80 Hz high-pass filter and 10 dB pad

Audio-Technica Cardioid Condenser MicrophoneAudio-Technica