30 Days Lowest Price Guarantee
Braided Fuel Line Pressure Regulator Kit Dual Outlet - Holley 4150 Carburetor 6AN
$ 99.95
$ 84.95
DESCRIPTION
Braided Fuel Line Pressure Regulator Kit - Dual Outlet - Holley 4150 Carburetor 6AN
This fuel regulator kit is designed for use with standard flange dual-feed carburetors running on gasoline engines. They allow you to adjust the fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either racing fuel pumps or any high-output fuel pumps. Pre-set at 6 1/2 psi. The kit includes fittings, a mounting plate, fuel lines, and adjustable fuel pressure regulator. For use with Holley, Quick Fuel, Pro Form and AED Dual Feed applications.
Notes: Fits standard flange, dual feed carburetors. Will work with manual choke or electric choke applications.
Details:
A High Flow Capacity For Single 4 Barrel Engines Up To 650 HP
Adjustable from 4-1/2 to 9 PSI
Big 3/8 NPT ports (1 in, 2 out). The (2) dual outlet ports are designed for dual fuel inlet carburetors or fuel block systems.
Includes: regulator, mounting plate, screws and instructions.
Fits standard flange dual feed carburetors. will work with manual choke or electric applications.
Fuel Line Information:
7/8"-20 Threaded Inlet
(2) - 1/8" Pipe Threaded Ports fit up to 2 Fuel Pressure Gauges
Regulator Outlet Fittings Information:
(2) 3/8" Pipe to 6AN Regulator Outlet Fittings
Regulator Inlet Fittings Information:
(1) 8AN to 3/8" Pipe Regulator Inlet Fittings
Will not work with fuel injection vehicles converted to carbureted that use a high pressure in-tank fuel pumps
Cannot be used to regulator down fuel pressure on vehicles with high pressure in-tank fuel pumps
Maximum head pressure before installing cannot be more than 6 1/2 - 7 lbs of fuel pressure.
Edelbrock carburetors MUST HAVE 4 1/2 - 5 psi
Holley carburetors MUST HAVE 6 1/2 psi - 7 psi
Quick Fuel carburetors MUST HAVE 6 1/2 - 7 psi
This fuel regulator kit is designed for use with standard flange dual-feed carburetors running on gasoline engines. They allow you to adjust the fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either racing fuel pumps or any high-output fuel pumps. Pre-set at 6 1/2 psi. The kit includes fittings, a mounting plate, fuel lines, and adjustable fuel pressure regulator. For use with Holley, Quick Fuel, Pro Form and AED Dual Feed applications.
Notes: Fits standard flange, dual feed carburetors. Will work with manual choke or electric choke applications.
Details:
A High Flow Capacity For Single 4 Barrel Engines Up To 650 HP
Adjustable from 4-1/2 to 9 PSI
Big 3/8 NPT ports (1 in, 2 out). The (2) dual outlet ports are designed for dual fuel inlet carburetors or fuel block systems.
Includes: regulator, mounting plate, screws and instructions.
Fits standard flange dual feed carburetors. will work with manual choke or electric applications.
Fuel Line Information:
7/8"-20 Threaded Inlet
(2) - 1/8" Pipe Threaded Ports fit up to 2 Fuel Pressure Gauges
Regulator Outlet Fittings Information:
(2) 3/8" Pipe to 6AN Regulator Outlet Fittings
Regulator Inlet Fittings Information:
(1) 8AN to 3/8" Pipe Regulator Inlet Fittings
Will not work with fuel injection vehicles converted to carbureted that use a high pressure in-tank fuel pumps
Cannot be used to regulator down fuel pressure on vehicles with high pressure in-tank fuel pumps
Maximum head pressure before installing cannot be more than 6 1/2 - 7 lbs of fuel pressure.
Edelbrock carburetors MUST HAVE 4 1/2 - 5 psi
Holley carburetors MUST HAVE 6 1/2 psi - 7 psi
Quick Fuel carburetors MUST HAVE 6 1/2 - 7 psi
- Includes: regulator, mounting plate, screws and instructions.
- Fits standard flange dual feed carburetors. will work with manual choke or electric applications.
- Big 3/8" NPT ports (1 in, 2 out). The (2) dual outlet ports are designed for dual fuel inlet carburetors or fuel block systems.
- Adjustable from 4-1/2 to 9 PSI
- A High Flow Capacity For Single 4 Barrel Engines Up To 650 HP
