It can be used for Garden, Home, Driveway, Patio, Deck, Yard, Stairs, etc. With modern technology,latest generation solor panel,motion sensor controling.It is green product,also economical without using electric power.

How to use it:
(Please follow the User Guide)
1:Must active the light with Key Pin to unlock the lighting system
2:After Mounting,Solar charging during the daytime when shining,lighting is not working.
3:At night,the lighting system working,motion sensor available.When any motions detecting within the range,like people passing by,"On-Brighting" activing for 30s,after that automatical turn to dim lighting.

3 Modes:: Off/On(Bright),
Automotion:When there is no motions,the light will automatical turn to dim lighting for a power saving.

Solar charging::
1:Mounting the device to face the south(the best way,recommending)
2:Avoiding the shelter,glass,shade,etc..So that you can let the solar panel get fully,directly shining.
The life of solar light will be affected if you make it get too close to the heat.
To avoid wrong sense and erro operating, the direct light source should not be above the solar panel;
* Make sure to charging the batteries for 2 or 3 sunny days before using(turn on) for the first time.

Specifications:
Night sensor:Auto identify daytime or night
Motion Sensor: up to 10ft and >120 degree detection range
Waterproof:IP65,(Doesn't means to dipping in the water,just against from the rainy days or other bad weathers)
Li-ion battery built-in: 3.7V 2200mAh
LED Qty: 9LEDs
Working time: 12hours
Charging Time:6-8 hours
Dimensions:165*78*99mm(6.5*3.07*3.90in)
Weights:0.2kg(0.44lb)

Packaging:
1 x Light
2 x Mounting sets(Screw and plastic wall plug,1 set is for free)
1 x Key Pin
1 x Manual

• The solar sensor wall light adopted 9pcs led and its brightness is up to 2835m. It can be very useful.We extend the capacity of built-in battery up to 2200mAh and the replaceable 18650 lithium batteries. That is a good way to keep the lights working for a few days after fully charged for normal usage.Material:ABS
• It will automatically turn on in the darkness or at night when someone walking by, and turn off in the brightness or in daytime. It will enter into high light mode when people come and stay for 30s after motion stops and then turn to dim light to save energy.
• It uses polysilicon solar panel whose light conversion efficiency is up to 17%. It will be more durable with waterproof, freeze-protection and sun block design. External waterproof switch, instead of pinhole switch, makes it easier to operate.
• The circuit board is coated with 3-resisting lacquer, which is insulated, damp proof, shockproof, dustproof, corrosion proof, anti-aging and anti-creeping. The back side of the solar light is sealed without hollow so it can effectively isolate the water and air.
• Let the solar panel get enough sunshine during the day and it will turn on automatically at night to act as a security light.

The solar sensor wall light adopted 9pcs led and its brightness is up to 2835m. It can be very useful.We extend the capacity of built-in battery up to 2200mAh and the replaceable 18650 lithium batteries. That is a good way to keep the lights working for a few days after fully charged for normal usage.Material:ABSDeXinYuan