Specification:

• Working voltage: DC12V
• Rating power: 120W
• Inflating Speed: 1.06 CFM
• Min. Amp: 10 Amps
• Maximum Amp: 15 Amps
• LED flashlight: Bright Torch
• Maximum Working Pressure 100 PSI
• Display Units: KPA, PSI, BAR, KG/CM

Operating Instructions:

1. Make sure the power switch is OFF (O position) and the vehicle engine is running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire's valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (M) button to choose the display unit. (4 units available: PSI, KPA, BAR, KG/CM). Press (-) or (+) button to set the desired 5. pressure, and then wait until it stops flashing.
5. Press (I) button to turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power by move the power switch to (O) position.
7. Unscrew the valve connector, place the tire valve dust cap back to the tire & disconnect the power cord from a 12V cigarette lighter socket.
8. How to turn on Flashlight? Move power button switch to (II) position.

• CONVENIENCE: Plug directly into Cigarette Lighter Socket. 12V 10AMP
• ULTIPLE USES: Inflate tires on cars, bikes, truck, and SUV. Adaptors for balls and inflatables included for sport equipments
• EASY TO READ: 4 Display Units: PSI, KPA, BAR, KG/CM
• LED FLASHLIGHT: Bright Torch
• PREVENT OVER INFLATION: Auto shut off when reaching the desired tire pressure.

CONVENIENCE: Plug directly into Cigarette Lighter Socket. 12V 10AMPEPAuto