2204 2300KV Brushless Motor
KV: 2300
No. of cell: 2S -3S
Framework: 12N14P
Propeller: 5 - 6 inch
Length: 32.2mm
Weight: 25g
Shaft diameter: 3mm
Diamter: 27.9mm

Matek Systems PDB XT60
General:
Input voltage range (3S-4S LiPo operation): 9 - 18V DC
Regulated 5V and 12V outputs
LED power indicators ( 5V & 12V outputs )
6 ESC outputs & 1 pair VCC/GND pads

ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)

BEC 12V 3S LiPo
Output voltage= 3S LiPo voltage -1V

Physical:
Dimensions: 36 x 50 x 4 mm (without XT60)
Mounting: 30.5 x 30.5mm, Φ3mm
Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Features:
2oz copper, 4-layers &1.6mm PCB.
Built-in XT60 Socket
Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant

Package Includes:
4 x 2204 2300kv Brushless motor + 16x screws (2x CW, 2x CCW)
1 x Matek Systems PDB XT60 W/ BEC 5V & 12V 2oz Copper

• The ETopLike 2204 brushless motor is compatible with the T-Motor carbon fiber propeller perfectly.
• The ETopLike MT2204 2300KV brushless motor is one of the best motor for 200-300 sizes multirotors among all the motors we`ve tested.
• Each motor and PDB XT60 is carefully balanced and tested before shipped out from factory.
• The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB.
• Package Contents: 4pcs 2204 2300kv Brushless motor + 16pcs screws (2x CW, 2x CCW); 1 x Matek Systems PDB XT60 W/ BEC 5V & 12V 2oz Copper.

The ETopLike 2204 brushless motor is compatible with the T-Motor carbon fiber propeller perfectly.ETopLike