30 Days Lowest Price Guarantee
Gevog 2pcs Rear Window Glass Gas Lift Supports Strut Shocks Fit 87-95 Jeep Wrangler
$ 26.99
DESCRIPTION
Fitment
1987-1995 Jeep Wrangler
Item-offered
2pcs New Rear Left+Right Window Glass Lift Supports
Location
Rear Window Glass Left+Right
Parameters
Extended Length: 645mm
Stroke Length: 285mm
Compressed Length: 360mm
Material
Steel
Cross-reference:
Can Replace The Following Part Numbers: SG214008; 4782; WGS-211; LSC-0211; 8195310; 8195629; 10660; 8436IR; 72223;
G0004296; 55000630; 55027180; 8955000630; 901114; 55029558; 901169; 72731; RB8795546; 95546; 610657; 8195373; 10664; 8543IT; G0004761; 55007272; 55029560;
Warranty
1 Year's Warranty
Color
Black
Installation-instructions
Always replace both lift supports to ensure top performance and to prevent twisting caused by uneven loading.
1. Turn off ignition. If old lift support has a window demister electrical connection, carefully disconnect the fittings.
2. Before removing old lift supports, examine any fittings supplied to determine which components must be re-used.
3. Have someone hold the hatch, bonnet, boot or rear window open while replacing the lift supports.
4. Loosen the fasteners, remove one end while being prepared to fight the pressure in the strut, move the end so it's
away from the bodywork, remove the other end, install that end of the new one, wrestle the other end into place and tighten up.
5. Make sure all connectors and hardware are in place, tight and secure. Reconnect electrical terminals at both ends
of the gas-charged lift support, if applicable to your car. Retain plastic end caps, if applicable to your car.
WARNING:
Use safety stands whenever a procedure requires you to be under the vehicle
1987-1995 Jeep Wrangler
Item-offered
2pcs New Rear Left+Right Window Glass Lift Supports
Location
Rear Window Glass Left+Right
Parameters
Extended Length: 645mm
Stroke Length: 285mm
Compressed Length: 360mm
Material
Steel
Cross-reference:
Can Replace The Following Part Numbers: SG214008; 4782; WGS-211; LSC-0211; 8195310; 8195629; 10660; 8436IR; 72223;
G0004296; 55000630; 55027180; 8955000630; 901114; 55029558; 901169; 72731; RB8795546; 95546; 610657; 8195373; 10664; 8543IT; G0004761; 55007272; 55029560;
Warranty
1 Year's Warranty
Color
Black
Installation-instructions
Always replace both lift supports to ensure top performance and to prevent twisting caused by uneven loading.
1. Turn off ignition. If old lift support has a window demister electrical connection, carefully disconnect the fittings.
2. Before removing old lift supports, examine any fittings supplied to determine which components must be re-used.
3. Have someone hold the hatch, bonnet, boot or rear window open while replacing the lift supports.
4. Loosen the fasteners, remove one end while being prepared to fight the pressure in the strut, move the end so it's
away from the bodywork, remove the other end, install that end of the new one, wrestle the other end into place and tighten up.
5. Make sure all connectors and hardware are in place, tight and secure. Reconnect electrical terminals at both ends
of the gas-charged lift support, if applicable to your car. Retain plastic end caps, if applicable to your car.
WARNING:
Use safety stands whenever a procedure requires you to be under the vehicle
- Fit 1987-1995 Jeep Wrangler
- Item-offered:2pcs New Rear Left+Right Window Glass Lift Supports
- Location:Rear Window Glass Left+Right
- Material:Steel
- Can Replace The Following Part Numbers: SG214008; 4782; WGS-211; LSC-0211; 8195310; 8195629; 10660; 8436IR; 72223; G0004296; 55000630; 55027180; 8955000630; 901114; 55029558; 901169; 72731; RB8795546; 95546; 610657; 8195373; 10664; 8543IT; G0004761; 55007272; 55029560
