Specification:
-Center Frequency(MHz): 1575.42
-Bandwidth(MHz): 6
-Input Impendence(Ω): 50
-V.S.W.R: -Consumption Electric: -Polarization Intensity: R.H.C.P
-Supply Voltage: USB 5V
-The Sound Coefficient: -Axial Ratio: 30Db
-Gain(dBi): 29dB±3dB(LNA
-Operating Current: -Cable Length approxi: 5meters (Receiver Part), 0.5/1.5meters (Transmitter Part)
-Working Temperature: 5℉- 131℉/(-15℃)-(+55℃)
-Package Included: 1 x Antenna transmitter, 1 x Receiver, 2 x 3M glue, 1x Cigarette lighter adapter.

• Forward GPS signal from outdoor to indoor. Cable Length: 5 meters (receiver part), 0.5M/1.5 meters (transmitter part)
• The product is mainly used for small areas of the GPS signal or GPS signal weak areas, eg:Small laboratory,car,etc...The repeater can make the GPS signal coverage area GPS devices can receive and outdoor signal strength stronger than the outdoor GPS signals. Because the car glass of metal explosion-proof membrane has shielding effect to GPS signals,So the sticker caused the car without GPS signals, the repeater can perfectly solve the problem.
• The receiver magnet adsorption installed at the top of the car trunk, the receive up .
• Transmitter installed in instrument panel under the windshield,or the Co-Driver's box, Pay attention to the emission surface (black shell side) for GPS devices (navigator), and ensure the transmitter distance of within 1 meter.No metal barrier between transmitter and GPS device,In order to achieve the best effect.The closer the distance, the stronger the signal.
• Butt joint on yellow between the receiver and transmitter, and tighten 4, After the receiver and transmitter installed, the power from cigarette lighter (input voltage within DC16V)

Forward GPS signal from outdoor to indoor. Cable Length: 5 meters (receiver part), 0.5M/1.5 meters (transmitter part)HXM