Product Description

Color: black

Description:

- The HDMI extender over a single UTP cables with IR control is the right way to send your HDMI signal over long distances.

- Instead of using expensive HDMI cables, this device lets you use your existing Cat5e/ 6 cables/sockets while also performing the same functions like transferring Deep Color video and new lossless compressed audio. - And if that weren't enough, you can use your existing remote to control your device through an IR blaster.

Specification:

* HDMI signal: Compatible HDCP

* Resolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz

* Network cable: Low resistance and consumption oxygen-free copper core(CAT6, CAT6A, CAT7)

* Transmission length: CAT6:60m at 1080P

* IR remote control: Support 20~60KHz wide frequency IR remote control

* Working temperature: 0°C~60°C

* Power: DC5V/1A 2pcs

* Power consumption: TX:2W; RX

* Product size: 2.82(W) x 2.62(D) x0.98(H)inch*2pcs

Installation Requirements:

1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc).

2. HDMI display device like SDTV, HDTV, projector with HDMI port.

3. UTP/STP cat6/6A/7 cable, follow standard IEEE-568B.

Note:

1.High quality cat6 or cat6e cable is needed to work with this hdmi extender

2.Only supports the PCM audio output

Package Contents:

1 x HDMI to RJ45 sender TX

1 x RJ45 to HDMI receiver RX

2 x DC5V/1A

1 x User manual

1 x IR blaster extension cable

1 x IR receiver extension cable

• Transmission Distance: Extends HDMI signals up to 60 meters at full HD 1080p by a Cat6/Cat7 cable.Point to Point connection.Don't support one to many connection.
• Before you buy it,please read this:Highly recommend use cat6/6a/7 cable.Cat5/5e cable can't reach the best performance.Don't use cat5/5e cable.Auto adjustment to Match cable Length:Adjust the specification automatically for different cable lengths 1-60m to achieve the best display.Supports uncompressed audio such as LPCM.
• Pure Hardware Transmission: It is pure hardware design.No need driver &plug and play.
• IR Extension Function, you can use the Signal source remote to control the source device at the receiver,Use standard HDMI Cable and Ethernet Cable
• Cat6A/Cat6/Cat7 cable follows the standard of IEEE-568B. Supports uncompressed audio such as LPCM.

Transmission Distance: Extends HDMI signals up to 60 meters at full HD 1080p by a Cat6/Cat7 cable.Point to Point connection.Don't support one to many connection.Aemyo