30 Days Lowest Price Guarantee
Plasma Table - Water table for hand held plasma cutters
$ 234.95
DESCRIPTION
The Plasma Table will sit on top of a Behrens 17 gal. tub or 55 gal. drum that is filled with water, this creates a very economical and effective Plasma Table. All of the sparks/slag and most of the smoke is captured with 4"-5" of an air gap above the water. The cutting slats just drop into place, which makes them easy to replace. The table requires welding to assemble, it will take about 30 minutes to layout, tack and weld.
We specifically designed the table to work with our Plasma Stencils, this is the cherry on top! We include a modified drill press clamp that has an extended arm to firmly hold the Plasma Stencils or a straight edge in place while you make your cuts. Because the clamp can be positioned 360° around the table, you can usually cut an entire small part out without moving the material. The usable cutting area is 21".
The Plasma Table is great for portable, temporary and/or permanent use.
-Portable use - Bolts are also included to attach the table to the tub, this makes the Plasma Table one piece and portable.
-Temporary use - The Plasma Table just rests on top of the tub, so it's easy to take apart and throw in the corner when your not using it.
-Permanent use - A couple extension tubes from your fab table, that the Plasma Table sits on, is great for extended use while still being removable. Or you can make a dedicated Plasma Table roll around with the plasma cutter underneath.
The Behrens 17 gallon galvanized steel tub is a great choice for those that want a quick and easy Plasma Table. Most farm or hardware stores have them in stock and they are sold through many online stores, just make sure you get the Behrens brand. It takes about 10 gallons of water to get a 5" air gap. Or a standard 55 gal. drum can be cut down to 8" high and use 5 gallons of water. 1/4" will have to be cut off of the cutting slats to fit a 55 gal. drum.
We specifically designed the table to work with our Plasma Stencils, this is the cherry on top! We include a modified drill press clamp that has an extended arm to firmly hold the Plasma Stencils or a straight edge in place while you make your cuts. Because the clamp can be positioned 360° around the table, you can usually cut an entire small part out without moving the material. The usable cutting area is 21".
The Plasma Table is great for portable, temporary and/or permanent use.
-Portable use - Bolts are also included to attach the table to the tub, this makes the Plasma Table one piece and portable.
-Temporary use - The Plasma Table just rests on top of the tub, so it's easy to take apart and throw in the corner when your not using it.
-Permanent use - A couple extension tubes from your fab table, that the Plasma Table sits on, is great for extended use while still being removable. Or you can make a dedicated Plasma Table roll around with the plasma cutter underneath.
The Behrens 17 gallon galvanized steel tub is a great choice for those that want a quick and easy Plasma Table. Most farm or hardware stores have them in stock and they are sold through many online stores, just make sure you get the Behrens brand. It takes about 10 gallons of water to get a 5" air gap. Or a standard 55 gal. drum can be cut down to 8" high and use 5 gallons of water. 1/4" will have to be cut off of the cutting slats to fit a 55 gal. drum.
- Water catches cutting stream without splashing back
- Clamping system is designed to work with our Plasma Stencils
- Great for portable, temporary and/or permanent use
- Easy to replace cutting slats.
- Water tub is not included
