This LED is suitable for light DIY mutirotor, airplane, helicopter, RC car... etc.
It can use as navigation light and Indicator light.
The LED adopts 8 pieces of RGB 5050 lamp beads, with DIP switch on board.
According to toggle different switch combination, the LED can switch among 7 colors.
Working Voltage: 14-17V DC (4S LIPO)
Dimension: φ30mm
Hole Pitch: 10mm
Hole diameter: 3mm
Weight: 2.5g

Note:
1. The parcel comes with a 30cm black and red power wire. User can cut it to the proper length according request.
2. Pay attention to the "+" and "-" and insulation
3. Toggle the switch on to different channel to choose 7 color
4. We suggest use double side tape to paste the LED lights on frame
When the output is 16V, the power and current of the LED:
B ON =blue, 0.64W, 0.04A
R ON =red, 0.64W, 0.04A
G ON =green, 0.64W, 0.04A
B+R ON =purple, 1.28W, 0.08A
B+G ON =cyan-blue, 1.28W, 0.08A
R+G ON =yellow, 1.28W, 0.08A
B+R+G ON =white, 1.92W, 0.12A

Package includes:
2x RGB LED lights board X8-16V
2x 300mm red/balck wire

• This LED is suitable for light DIY mutirotor, airplane, helicopter, RC car... etc.
• It can use as navigation light and Indicator light.
• The LED adopts 8 pieces of RGB 5050 lamp beads, with DIP switch on board.
• According to toggle different switch combination, the LED can switch among 7 colors
• Working Voltage: 14-17V DC (4S LIPO); Dimension: φ30mm; Hole Pitch: 10mm ;Hole diameter: 3mm; Weight: 2.5g

This LED is suitable for light DIY mutirotor, airplane, helicopter, RC car... etc.Rcmodelpart