Working Mode

3 in 1 Lighting Modes

1.light control mode
During the daytime,the light absorbed solar energy.Light up at night,It will automatically turn off at dawn

2.Dim light mode
It will automatically turn on dim light at night, when people come close about 2-4m, it will turn on bright light for 30 seconds then automatically turn to dim light mode.

3.Light sensor and motion sensor
It will automatically turn on the internal sensor at night .When people in the sensing range, the human sensor automatically turn on.be off within 30s after you walk away over the sensing range.


Operation:
1.please only install this light in the places with enough direct sunlight in order to charge the light during daytime.
2.Drill a hole on proper position.
3.Insert the expansion pillar-hinge into the hole.
4.Fixed on the wall with screws.
5.Then hang the lamp to corresponding screw and push down.

Specifications:
Li-ion battery: 3.7V 2200mAh 2 pcs
Sensor range: 90-120 degrees
LED QTY: 50LED
LM:300
Solar panel: 1.8W, 17% of efficiency
Solar charging time: 8-12h
Working time 8-10 hours
IP Rating:IP65

Package included:
1*Solar sensor light
1*User manual
2*Expansion pillar-hinge
2*Screw
2*Battery

• No wiring, solar power,save power , Convenient and safe.
• Intelligent sensing system provides overcharge, over voltage, short circuit and more security protection
• Auto-sensing: Detecting light brightness and human motion automatically.
• Housing material is high quality ABS+PC, Dustproof and rated lP65 waterproof, perfect for outdoor using.
• 2 pcs 2200 mah 18650 rechargable battery,can lighting 10 hours

No wiring, solar power,save power , Convenient and safe.innotek