STEEP SLOPE MOUNT BRACKET for GL742 DG711 DG511 DG613 DG813 Pipe Grade Laser M103 -Any Laser with a Manual Mode can be set to Steep Slope- M103 Steep-grade adapter The steep-grade adapter allows the internal leveling mechanism of the steep-grade laser to level the laser at grades greater than 25%25. Connecting M103 Steep-grade adapter 1. Set up a tripod so that its mounting surface is as close to true level as possible. Make sure that one of the tripod legs is aligned to the down-grade side of the 1 axis of the laser. 2. Make sure that the steep-grade adapter is connected to the laser at the mark that indicates the required grade range. 3. Connect the steep-grade adapter to the tripod. Activating/deactivating manual mode Manual mode bypasses the laser's automatic self-leveling mode so you can use the laser in vertical mode. Manual mode also allows you to tilt the laser beyond its built-in sloping capability so you can perform steep-sloping horizontal applications. 1. Make sure the laser is on and in the orientation appropriate for your application needs (horizontal or vertical). 2. Press the manual mode button. Note - When manual mode is activated, the status LED flashes red once per second and scrolling horizontal segments appear in the LCD. 3. To resume automatic self-leveling mode, press the manual mode button again. Weight - 3.60lbs Dimensions - 2.4in x 13.4in x 11in Includes: Steep Grade Block and 5/8 thread mounting handle (as pictured).

• Spectra Precision Steep Slope Bracket GL742 DG711 GL622 Pipe Grade Laser M103 Trimble 50%25+

Spectra Precision Steep Slope Bracket GL742 DG711 GL622 Pipe Grade Laser M103 Trimble 50%25+Spectra Precision