Specifications:
Item: TECKWRAP Clear Car Door Edge Guard Paint Protection Film(TPU)
Size:0.5*157 Inch£¨1.3*400cm)
Installation method: wet application
Main use: Vehicle full & partial wrap
Adhesive Type: Removable, clear , Repositionable
Placement: Vehicles Door Edge
Features:
TECKWRAP Door Edge Guard durable material is virtually invisible yet helps prevent chipping, scratching, scuffing to the protected surface.
Suitable for automotive paint, bicycles, motorcycles, and sporting goods.
High Gloss & Anti-scratch
Excellent self-healing
Transparent,Self-adhesive
Will not fade, chip, crack not peel
Water resistant
Easily cleaned with water
Long lasting
Easy removal with no residual
Installation Instruction:
1.Clean the surface of car door edge guard 2.Cut on appropriate size piece of film from the roll using a pair of scissors.
3.Peel 2-3 inches of the backing paper from the end of the roll and align the film with the door edge.
4.Allow the adhesive to touch the paint and smooth with your thumb. If the part is not straight, pull the film back up and realign.
5.Squeegee the water from beneath the film using the supplied squeegee.
Notice:
Films should not be overstretched, but sometimes needs to be stretched in order to coincide with the places where there are curves.
When using high-pressure sprayers, do not directly use the nozzle toward the edge of the film.
otherwise, the edge will tilt. Do not tear the edges and corners, otherwise, the tilted film can't be recovered.

• High Gloss & Anti-scratch: Door edge guards will protect your vehicle from scratches
• Excellent self-healing; Anti-fouling with coating layer and non yellow
• UV resistant;Waterproof;Easy to clean & remove
• Strong stretch; no residue glue
• Size:0.5*157 Inch/Package:1 pcs

High Gloss & Anti-scratch: Door edge guards will protect your vehicle from scratchesTECKWRAP