30 Days Lowest Price Guarantee
Xiangtat APM2.8 ArduPilot Flight Controller+Neo 6M GPS+ 915Mhz 3DR Radio Telemetry Kit + Power Module + MiniOSD
$ 85.99
DESCRIPTION
APM2.8 Flight Controller:
-Arduino Compatible
-Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
GPS
Features:
-Built-in compass GPS module
-Main chip: Ublox-6M
3DR Radio Telemetry Kit 915 Mhz
Introduction
-This board can be used for CRIUS AIOP and Arduflyer / ArduPilot-Mega.
-MAVLink-OSD with switching DC/DC stepdown powersupply to maximize efficiency on power system. No more heating problems when using this OSD board.
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry).
Features
-ATMEGA328P Microcontroller
-MAX7456-EUI monochrome on-screen display
APM Arduflyer Power Module V1.0
Introduction:
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements,all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry).
It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Package Included:
-1* APM2.8 Board with case
-1* Neo-6M GPS module with compass ic
-1* MiniOSD
-1* Power Module
-1* 3DR Radio Telemetry Kit 915Mhz
-1* Cables set
-1* Shock Absorber
-Arduino Compatible
-Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
GPS
Features:
-Built-in compass GPS module
-Main chip: Ublox-6M
3DR Radio Telemetry Kit 915 Mhz
Introduction
-This board can be used for CRIUS AIOP and Arduflyer / ArduPilot-Mega.
-MAVLink-OSD with switching DC/DC stepdown powersupply to maximize efficiency on power system. No more heating problems when using this OSD board.
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry).
Features
-ATMEGA328P Microcontroller
-MAX7456-EUI monochrome on-screen display
APM Arduflyer Power Module V1.0
Introduction:
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements,all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry).
It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Package Included:
-1* APM2.8 Board with case
-1* Neo-6M GPS module with compass ic
-1* MiniOSD
-1* Power Module
-1* 3DR Radio Telemetry Kit 915Mhz
-1* Cables set
-1* Shock Absorber
- The 3DRobotics 3DR Radio is the ideal way to setup a telemetry connection between your APM and a ground station. 3DR Radio Telemetry Kit 915Mhz APM2.8 Flight Controller:Newest APM version, with Shock Absorber designed
