1 1/2" Pressed Steel Post Caps For Square Steel Posts (Lot of 6 Caps)

Caps are for 1 1/2" square steel fence posts or gate frame sides and come unpainted.

Caps can be tapped on to the top of a 1 1/2" square steel fence post or gate frame side and will normally secure by gently tapping on with a hammer. If needed you may also tack weld the corners to insure the caps don't come loose, but tapping them down onto the top of the post should suffice as caps will go down approximately 3/4" over the post and fit snug. Paint after installing to match the post and prevent from rusting.

Main Color: Unpainted Steel

• Caps are for 1 1/2" square steel fence posts or gate frame sides and come unpainted.
• Caps can be tapped on to the top of a 1 1/2" square steel fence post or gate frame side and will normally secure by gently tapping on with a hammer.
• If needed you may also tack weld the corners to insure the caps don't come loose, but tapping them down onto the top of the post should suffice
• as caps will go down approximately 3/4" over the post and fit snug. Paint after installing to match the post and prevent from rusting.
• Material: Pressed Steel

Caps are for 1 1/2" square steel fence posts or gate frame sides and come unpainted.imported