This Series ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control.
It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures.
This inline valve has a Standard port flow and 1/4" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction.
It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil,chemicals, petroleum and gas applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses.
Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees,
so that the hole of the ball is perpendicular to the opening of the valve.
Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve.
A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation.
They are primarily used in air, gas, liquid,chemicals petroleum and steam applications.

DANSPEED International distributes professional pipe, fittings, and valves . Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 piece x 1/4" ball valve

• Handle:Heavy duty handle with blue vinly insulation
• Serviceable Valve - Can be taken apart via threads, Female NPT Ports
• Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases
• Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.Temp Range:-60F to 450F.Dimension: 1/4"
• This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications. The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve

Handle:Heavy duty handle with blue vinly insulationDANSPEED