Product Description:
Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA. This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements.

Features:
Connector A: 1 x 36 pin 4i Mini MultiLane SAS (SFF-8087) - male
Connector B: 4 x 7 pin Serial ATA - female
SAS Lane Qty: 4-Lane
Data Rate: 6Gbps per channel
AWG30 Twinaxial 8-pair high-bandwidth low-skew wire
Impedance = 100 Ohms
Crossover wiring
High performance 8 pair wire construction
Exceeds SAS 1.1 and SAS 2 Specification

Applications:
DATA Center
Servers, Storage racks, RAID systems
External Storage Systems
SAS/SATA HBA interfaces
Direct-attached storage (DAS)
Switches

• Internal SAS SFF-8087 to 4x SATA Cable, 1-meter(3.3ft)
• AWG30 Twinaxial 8-pair high-bandwidth low-skew wire
• Impedance = 100 Ohms
• Up to 6Gbps data rates per channel
• This Mini SAS to SATA cable provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

Internal SAS SFF-8087 to 4x SATA Cable, 1-meter(3.3ft)10Gtek