12W Infrared Dimmable LED Light Emitter - Extreme Environment - Magnetic Base - 90'L X 70'W Beam(-16' Flying Leads-750nm-Spot). Buy American Compliant The LEDLB-4E-IR-M-PWM6 from Larson Electronics is an Infrared LED Light Bar with Dimmer that offers high light output and extreme durability combined with a versatile magnetic mounting system that provides convenience and secure attachment to vehicles, equipment and any flat metallic surface. This IP68 rated infrared dimmable LED light bar produces an infrared light beam that can only be seen through the use of night vision goggles.The 750Nm and 850Nm versions have a very slight red glow around the LED emitters when viewed from a certain angle while 940Nm versions are completely invisible to the naked eye. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in commercial and industrial security applications as well as military environments. The LEDLB-4E-IR-M-PWM6 infrared dimmable LED light bar from Larson Electronics produces light in the infrared 750Nm, 850Nm or 940Nm end of the light spectrum depending upon the version selected. Four Edison Edixeon® 3 watt infrared emitters producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam 90` long by 70` wide with limited spread or light spillage. We offer optional floodlight versions of this light that have 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture. These infrared LED light bars are IP68 rated waterproof to three feet, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.

• Runs on any voltage-9 to 42V. Infrared beam can only be seen thru use of night vision goggles.
• 750Nm or 850Nm very slight red glow around LED emitters-940Nm totally invisible to the naked eye.
• 4-3 watt LEDs producing 180 lumens each-arranged in rows & paired with high purity 10 degree optics.
• Tightly focused spot beam 90'L X 70'W. Opt. flood w/35 deg. optics projects 70'L X 60'W beam.
• Equipped with a 200lb grip magnetic mount base 16' coil cord ending in a cigarette plug connector.

Runs on any voltage-9 to 42V. Infrared beam can only be seen thru use of night vision goggles.Larson Electronics LLC