THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

1999-2015 Ford F250 Superduty (CHECK STUDS CAN BE EITHER A 14x2 OR A 14x1.5)
1999-2015 Ford F350 Superduty (CHECK STUDS CAN BE EITHER A 14X1.5 OR A 14x1.5)

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, FORD TRUCKS CAN BE EITHER A 14x1.5 OR A 14x1.5
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

• Vehicle Bolt Pattern: 8x170
• Hub Bore: 124.9mm
• Thread Pitch: 14x1.5
• Thickness: Each Spacer Measure 2" Thick

Vehicle Bolt Pattern: 8x170Titan Wheel Accessories