Prepare the Remote Transmitter:
Remote Transmitter:
1). Connect the charger connector to the charging jack.
2). Plug the charger into a standard outlet.
3). The red light on the Transmitter will be lighted.
4). Charge the Transmitter at least 6 hours for the first charger.
Low battery Indicator(the symbol) :Q will show up on the right down side of LCD screen.

How to Use the Transmitter:
1). To turn on/off the Transmitter,Press the mode button on the Transmitter for 5 seconds.
2). By pressing the Mode button to change to different modes ----the LCD images will change.
3). Press the up and down buttons on right hand side to set level.
4). Choose the different channels for different receivers.
5). The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
6). In STANDBY MODE, press any button (except LED light button) to wake it up.

Package Content:
1 x remote control unit
1 x collar
1 x charger &cord
1 x test light &replacement probes
1 x Operating Instructions

• 100 levels of vibration.
• 100 levels of static.
• The levels can be altered by use of up & down button.
• The Collar length can be adjustable from 12 inches to 22 inches
• If you hear noise from the collar when you shock it, it is normal as it comes from the charging beads inside

100 levels of vibration.United States