THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)

1 Series (E82, E88) 128i, 135i, M1, 1M Coupe
3 Series (E30) M3
3 Series (E36) 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3
3 Series (E46) 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330ci, 330i, 330xi, M3
3 Series (E90, E91, E92, E93) 325i, 325xi, 328i, 328xi, 330i, 330xi, 335d, 335i, 335is, 335xi, M3
5 Series (E28, E34) 525i, 528e, 530i, 535i, 535is, 540i, M5
5 Series (E60, E61 2004-2010) 525i, 525xi, 528i, 530i, 530xi, 535i, 535xi, 545i, 550i, M5
6 Series (E24, E63, E64) 633i, 635i, 645ci, 650i, M6
7 Series (E23, E32, E38) 730i, 730il, 733i, 735i, 735il, 740i, 740il, 750i, 750il
8 Series (E31) 840ci, 840i, 850ci, 850i

Additional BMWs
1996-2002 Z3 (Typ RC)
1998-2002 M-Coupe/Roadster (Typ MRC)
2003-2009 Z4 (E85, E89)
2006-2008 Z4 M Coupe/Roadster (M85)
2000-2003 Z8 (E52)

ADDITIONAL INFORMATION

• May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
• Simple, bolt-on installation with minimal tools
• Spacers are Made of Forged Billet T6 6061 Aluminum

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You Can Cut Your Existing Studs To The Correct Length

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x120
• Hub Bore: 72.56mm
• Thickness: Each Spacer Measure .6 Thick
• Will NOT WORK with stock length studs. Extended Wheel Studs are ABSOLUTELY NEEDED for proper installation
• Hubcentric Wheel Spacers with Wheel-Centric Lip. This means it will fit perfectly over your hub - eliminating possibility of vibrations. Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers

Vehicle Bolt Pattern: 5x120Titan Wheel Accessories