Access Power Controller with PowerSupply - Input 115VAC 60Hz rated @ 4.4 amp. - Power supply input options: a) One (1) common powerinput for ACM8/ACM8CB and lock power (factory installed). b) Two (2) isolated power inputs - One (1) to power the ACM8/ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10 amp total). - Eight (8) Access Control System trigger inputs. Input options: a) Eight (8) normally open (NO) inputs. b) Eight (8) open collector inputs. c) Any combination of the above. - Output: 24VDC @ 10 amp supply current. - Eight (8) independently controlled outputs. Output options: a) Eight (8) Fail-Safe and/or Fail-Secure power outputs. - Eight (8) auxiliary power outputs (unswitched) - Output ratings: PTCs are rated @ 2.5 amp. - Filtered and electronically regulated outputs (built-in power supply). - Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs. - Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input. b) Polarity reversal input from FACP signaling circuit. - Alarm output relay indicates that FACP input is triggered (form C contact rated @ 1 amp 28VDC not evaluated by UL). - Visual Indicators: Red LEDs indicate outputs are triggered (relays energized). Green LED indicates FACP disconnect is triggered. AC input and DC output LED indicators. - Built-in charger for sealed lead acid or gel type batteries. AL1024ULXB (Power SupplyBoard) maximum charge current 3.6 amp. Automatic switch over to stand-by battery when AC fails. Zero voltage drop when unit switches over to battery backup (AC failure condition). AC fail supervision (form C contact). Battery fail and battery presence supervision(form C contact). - Mfg # AL1024ULACMCB

• Model:
• AL1024ULACMCB

Model:Altronix