Is the seat of your office chair or computer chair no longer staying at the height that you want? Does it keep dropping too low? The good news is that you do not have to replace the entire chair if the gas lift has failed or if it is not suitable... just replace the gas lift for a fraction of the cost! CHARG-e Gas Lifts are locking gas springs designed for variable seat height adjustment of swivel chairs, task chairs, executive chairs, operator chairs, computer chairs, draughtsman's chairs and swivel stools. The gas spring is a double cylinder system that consists of a pressure tube and a guiding tube. The tubes provide a smooth seat-height adjustment, they gently absorb the weight of the sitter, and they allow bending movements (for example when the load on the seat is not centred). The overall result is that you can work more comfortably. This 7-inch chrome straight gas lift has these important measurements: * Length of outer cylinder (body) = 187mm * Diameter of outer cylinder = 50mm, narrowing to 40mm * Diameter of inner cylinder = 28mm, narrowing to 26.3mm.

• 7" chrome straight gaslift for an office chair
• Length of outer cylinder (body) = 187mm
• Will fit standard office chair bases (50mm central hole diameter)
• Will fit standard office chair mechanisms (26.3mm central hole diameter)
• Includes instructions on how to remove old gas lift from your chair.

7" chrome straight gaslift for an office chairCHARG-e