30 Days Lowest Price Guarantee
ContempoViews HX711: DIY Digital Jewelry Scale Kit For Arduino 1016
DESCRIPTION
Description
This is a do-it-yourself kit to create a small precision scale for weighing jewelry and other small objects that require exact measurements.
Technical Information
HX711 is designed for high precision weighing sensor 24 A / D converter chip. Compared with the same type of other chip that integrates the peripheral circuits including power supply and on-chip clock oscillator which other similar types of chips needed.
With high integration, fast response, anti-interference and other advantages. Reducing the overall cost of electronic scales and improve the overall performance and reliability. The chip and the MCU chip interface and back-end programming is very simple, all the control signals from the pin drivers, doesn't need to programming the registers of the chip.
Input selector switch can be arbitrarily selected channel A or channel B, and is connected with its internal programmable low-noise amplifier. Channel A programmable gain is 128 or 64, corresponding to the full amount of the differential input signal amplitude is ± 20 mV or ± 40 mV.
Channel B is fixed gain of 32 used for the system parameters detected. Chip provides regulated power supply can be provided directly to the external sensor and chip A / D conversion, the system board doesn't need additional analog power. The chip internal clock oscillator does not require any external devices. Automatic power on reset function simplifies the initialization process to boot.
This is a do-it-yourself kit to create a small precision scale for weighing jewelry and other small objects that require exact measurements.
Technical Information
HX711 is designed for high precision weighing sensor 24 A / D converter chip. Compared with the same type of other chip that integrates the peripheral circuits including power supply and on-chip clock oscillator which other similar types of chips needed.
With high integration, fast response, anti-interference and other advantages. Reducing the overall cost of electronic scales and improve the overall performance and reliability. The chip and the MCU chip interface and back-end programming is very simple, all the control signals from the pin drivers, doesn't need to programming the registers of the chip.
Input selector switch can be arbitrarily selected channel A or channel B, and is connected with its internal programmable low-noise amplifier. Channel A programmable gain is 128 or 64, corresponding to the full amount of the differential input signal amplitude is ± 20 mV or ± 40 mV.
Channel B is fixed gain of 32 used for the system parameters detected. Chip provides regulated power supply can be provided directly to the external sensor and chip A / D conversion, the system board doesn't need additional analog power. The chip internal clock oscillator does not require any external devices. Automatic power on reset function simplifies the initialization process to boot.
- Precision weight measurement for jewelry and other objects
- Programmable gain is 128 or 64
- Two selectable differential inputs