Crazepony FX798T Blade Inductrix FPV Camera Kit
Crazepony FX798T Blade Inductrix FPV Camera Kit
30 Days Lowest Price Guarantee

Crazepony FX798T Blade Inductrix FPV Camera Kit

$ 67.99 $ 42.99

DESCRIPTION

FX798T Blade Inductrix Tiny Whoop FPV Camera Kit

Description:
FX798T FPV Camera
Output power: 25mW
Input power: 2.5 ~ 5V, Video output: NTSC
Current Consumption: 230mA, AV Output: VGA 640 * 480 PAL/1VP-P
Camera resolution: 600TVL, Min illumination: 1 lux
Field of view: 120 degrees viewing angle
Antenna dimensions: 20mm * 25mm diameter Antenna: 3 lobe right hand circular polarized
Frequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917MHz
Push button operation, long press for band, short press for channel
2 row LED indicators, 5 LED for band, 8 LED for channel
Size: 17 * 17.5 * 12.5mm , Weight: 3.4g
Inductrix FPV Camera Mount
This is a Camera/VTX mount for the Blade Inductrix. the chance of tearing a SMD component of the board with aggressive double sided tapes. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Solder your power wires
2pcs Blade Inductrix JST Y Splitter and JST 1.25mm Connector Cable
Y splitter:
Wire Length: 15mm Connector: Micro JST 1.25, 2 Pin Wafer
Weight: 5g
Applying: Use one battery to supply two power for Transmitter and Flight controller.
Micro JST cable:
frequency: Low frequency
Range of Application: PCB
Lenghts: 100mm
Type of adapter interface: ZIF
Wire: 1571 28
Package Including
1 * FX798T TX Camera Combo
2 * FPV Antenna
2 * FPV Camera Mount(Random color)
2 * Blade Inductrix Ultra Micro JST Y Splitter
2 * Micro JST 1.25mm Connector Cable
1 * User manual
  • FX798T camera -all in one 5.8G 40CH 25mW VTX 600TVL camera with FPV circular polarization clover leaf antenna
  • Button Control Instead of Switch to change channels,One combo kit for tansmitter and camera
  • Connect to 3.7V 1S battery to work and work well with Fatshark goggles,This is a Camera/VTX mount for the Blade Inductrix.
  • All stock hardware is used, super simple installation. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble.,Y splitter length: 15mm(0.59inch)
  • Applications: 1.one battery to supply two power for Transmitter and Flight controller; 2.perfect alternative udgraded pigtail for blade inductrix.
FX798T camera -all in one 5.8G 40CH 25mW VTX 600TVL camera with FPV circular polarization clover leaf antennaCrazepony

YOU MIGHT ALSO LIKE