Makerfocus UBEC 3 in 1 150W Charger Discharger Voltage Tester Balancer for Lipo Battery
Makerfocus UBEC 3 in 1 150W Charger Discharger Voltage Tester Balancer for Lipo Battery
30 Days Lowest Price Guarantee

Makerfocus UBEC 3 in 1 150W Charger Discharger Voltage Tester Balancer for Lipo Battery

$ 27.99

DESCRIPTION

UBEC 3 in 1 150W Charger Discharger Voltage Tester Balancer for Lipo Battery

Description:
Screen type : 2.6/ LCD screen
Voltage: 7.4V~25.2V (Please use voltage divide port)
Receiver battery: 1.2V~12V DC
Balance voltage setting: 2.0-3.9V(3.3V default)
Discharge voltage setting range: 3.0-4.2V (3.9V default)
Discharging Current (4.0V/Cell): Approx 450mA
Supports battery pack with JST (or Steering Gear Pin)/ RX connector
Discharge power: 150W
Size : 93.5 * 60 * 17 mm
Weight : 70g
Usage: Compatible with Li-Po/Li-Fe 2~6 cell battery or Receiver Battery
The new breakthrough, on the basis of the original triad to increase the function of large current discharge, the large current discharge control board and discharge with outer bulb, achieved 50w to 150 w power fast discharge function.
It with a replacement bulb: discharge of 150 w for a single light bulb, without wires.

Caution:
In the working condition, the heat of the bulbs will be very high.
The heat can melt the plastic material instantly. Don't touch it with your hand and put bulbs on a plastic table !
Every time with a battery, can not connect two plug at the same time.
You can choose the voltage display (the default), discharge (you can set the discharge to cut-off voltage), the lithium electricity balance function.

Package Including
1 * Battery balancer
1 * External Discharge Module
3 * 12v 150W bulbs
  • The new breakthrough, on the basis of the original triad to increase the function of large current discharge, the large current discharge control board and discharge with outer bulb, achieved 50w to 150 w power fast discharge function.
  • It with a replacement bulb: discharge of 150 w for a single light bulb, without wires.
  • Balance voltage setting: 2.0-3.9V(3.3V default)
  • Discharge voltage setting range: 3.0-4.2V (3.9V default)
  • Discharging Current (4.0V/Cell): Approx 450mA
The new breakthrough, on the basis of the original triad to increase the function of large current discharge, the large current discharge control board and discharge with outer bulb, achieved 50w to 150 w power fast discharge function.Makerfocus

YOU MIGHT ALSO LIKE