Durable cast-aluminum drive system incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster Miller's "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than unit Cable management built into the handle Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored What's Included Millermatic 211 6.5 ft (2 m) power cord and MVP adapter plugs for 120V and 240V 10 ft (3 m) M-100 MIG gun and cable assembly 10 ft (3 m) work cable and clamp Argon and AR/CO2 mix regulator/flow gauge with hose Spool of Hobart® .030 in (0.8 mm) solid wire Two contact tips for .030 in (0.8 mm) wire Quick SelectTM drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire Material thickness gauge #229895 Hook-and-loop cord wraps

• Auto-Set: The right steel settings automatically
• Welds thickest material in its class! The Millermatic® 211 Auto-SetTM with MVPTM has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 V
• Infinite voltage control gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or anytime you want to set your own parameters on mild steel
• Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-SetTM with MVPTM, the SpoolmateTM 100 Series spool gun allows you to weld from 18 ga-3/8 in aluminum
• Smooth-StartTM provides a smooth, spatter-free start. It's the best-starting machine in the small MIG machine category. No pop gun starts and virtually no spatter to clean up

Auto-Set: The right steel settings automaticallyMiller Electric