Descriptions::
Bender Diameter: 20mm (0.79"), 30mm (1.18") & 43mm (1.69")
Processing Material: Aluminum
It can bend aluminium 0.8mm

Usage:
Engraving acrylic panel
Slotted aluminum (or other metal trim materials), after bending, toward the edge of the acrylic panel began around the word
Encountered arc, according to the panel, put the sidebar on the top of the roller (Depending on the size of the arc to select a different drum), grasp both sides of the sidebar, pulling the roll or directly pressure to fit the curvature
Scroll to roughly arc, alignment panel, continue around the edges, you can take a small rubber hammer finishing
For triangular prism, slotted and then use, or small-angle extrusion, bending
We strive for 5-star feedback, any question, please contact us before leaving feedback or review, we will deal with the issue immediately and carefully until you are satisfied

• A set containing a tripod, a rounded frame, three different specifications of the drum
• Height is twelve centimeters, suitable for normal trim needs
• Tripod has forty-five degrees and a ninety degrees
• Tripod and circular shelves have set aside mounting holes, when using, please fixed

A set containing a tripod, a rounded frame, three different specifications of the drumSigntigerGentle