Features: Dual-Processors, ARM+FPGA Support all versions of Mach3 (can't work with Mach4). Work under Windows 32-bit (not including Mac OS) USB jack does not need to install the driver Full support USB hot-swappable, USB connection status monitoring at any time. Supports 3-axis linkage Max. step-pulse frequency 2 MHz, can connect servo/stepper driver. The indicator light indicates various working status Onboard isolated power supply , not need external power supply. All IO port fully isolated Support spindle speed PWM output, spindle pulse and direction output; from 0 to 10V analog voltage. Match wireless electronic mach3 MPG well Axis output control

CPU: Dual-Processors, ARM+FPGA

Drive Current: Isolated open collector output; 5V, 20mA

Drive: Pulse + direction output

Output frequency: 2000 KHZ (2MHz)

MK3: 3-axis

Isolation Voltage: 3.5KV

Analog voltage output:0-10V

PWM output:5V, 1KHZ, Duty; 0-100%

Pulse + direction output: 5V, 15HZ to 4 KHZ

Spindle speed input

Input:Isolated input, 5V pulse signal

Isolation Voltage:3.5KV

8 IO output

Drive Current:Isolation: 50mA, 25V

Isolation Voltage:3.5KV

16 IO input

Input Current:Isolated inputs, 5 mA, maximum voltage 25V

Isolation Voltage:3.5KV

Mach3 Port Position:P1 Port

• Dual-Processors, ARM+FPGA
• Support all versions of Mach3
• USB jack does not need to install the driver
• Supports 3-axis linkage(MK3)
• Max. step-pulse frequency 2 MHz

Dual-Processors, ARM+FPGAUCONTRO