This is top-quality clone remote, which will clone your V2 TSAW1-433 / TSAW2-433 / TSAW4-433 / T2SAW433 / T4SAW433 fixed code remote controls. With this remote cloner, you can clone all 433.92MHz fixed code key fobs. How to clone your remote, with an easy programming videos: • https://www.youtube.com/watch?v=cysYPSMgPXY or https://www.youtube.com/watch?v=oX4FNLXNXpQ. Follow these easy steps to program your remote; • You need to erase the remote first : 1) Press and Hold button 1 and button 2 together - Led will flash 3 times 2) Keep holding button 1 and release button 2 3 times, LED will start Flashing Non-Stop. (it means, that remote is erased) • Next you need to clone your original remote : 1) Put both (ORIGINAL and CLONE) remotes Into "Back to Back position ( II )" or "Side-by-Side". Make sure they have direct contact , touching each other. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make : 2 blinks - 3 blinks- Steady = Successfully cloned, only after the light goes into steady. • If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. • Note: you don't need an access to you control board or receiver!!! If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.amazon.com/dp/B01MSRPVD2 . WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION !!!

• Great value, High quality V2 compatible clone remote control!!!
• Latest 2017 technology, 4-channel fixed code remote control, which can be used with many of the garage and gate automation systems !!!
• Fast cloning procedure. It clones within 10 seconds!!!
• Battery and keychain included!
• Distance: Extra Long Range !!! Up to 100 meters!!! EVEN BETTER QUALITY, THAN THE ORIGINAL V2 REMOTE !!!

Great value, High quality V2 compatible clone remote control!!!V2 replacement remote / clone