Using the Scan Tool Procedures 1. Turn the ignition off. 2. Locate the vehicle's 16-pin Data Link Connector(DLC). 3. Connect the Scan Tool cable connector to the vehicle 's DLC. The cable connector is keyed and will only fit one way. (If you have problems connecting the cable connector to the DLC, rotate the connector 180 and try again. 4. Turn the ignition on. But do not start the engine. 5. When the Scan Tool cable connector is properly connect to the vehicle's DLC, the LCD display shows instructions for select New Scan. 6. Press the New Scan button. A sequence of message showing the OBD2 protocols will be observed on the display until the vehicle Protocols. Note: If the Scan Tool fails to communicate with the vehicle's computer, an Unable to establish a link with the vehicle message shows up. 1) Verify that the ignition is ON. 2) Check if the Scan Tool's OBD2 connector is securely connected to the vehicle's DLC. 3) Verify that the vehicle is OBD2 compliant. 4) Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and repeat the procedure from the step 6.

• Note: Please DO NOT put battery in while using. It will power on as soon as connected
• Latest Version : 2016,Updated with more fault code coverage
• Help prevent costly future engine trouble and identify problems when buying or selling a used vehicle with the MULT-OBD scan too
• Easy-to-read screen (Even in bright sunlight, the new designed display delivers clear, crisp text and images with no glare) and also saves up to 15 scans for later viewing.
• Works with all 1996 and newer cars & light trucks that are OBD2 compliant.

Note: Please DO NOT put battery in while using. It will power on as soon as connectedWhizzotech Corp.