3 X V2 PHOX2, V2 PHOX4 compatible CLONE remote control replacement transmitters, 433,92Mhz rolling code clone!!! 3 Top quality clone remotes for THE BEST PRICE!!!
3 X V2 PHOX2, V2 PHOX4 compatible CLONE remote control replacement transmitters, 433,92Mhz rolling code clone!!! 3 Top quality clone remotes for THE BEST PRICE!!!
30 Days Lowest Price Guarantee

3 X V2 PHOX2, V2 PHOX4 compatible CLONE remote control replacement transmitters, 433,92Mhz rolling code clone!!! 3 Top quality clone remotes for THE BEST PRICE!!!

$ 35.90

DESCRIPTION

These are 3 pieces of high quality 433.92Mhz V2 clone replacement remotes, that duplicates your V2 Phoenix2, Phoenix4, PHOX2, PHOX4, TSC2, TSC4, TRC2, TRC4 remote controls. Parameters: 433.92Mhz rolling code frequency • Battery and keychain included • HOW TO CLONE YOUR REMOTE: You need to erase the remote first : 1) Press and Hold Lock and Unlock buttons together - Led will flash 3 times 2) Keep pressing Lock button, press Unlock button 3 times. Led will start Flashing Non-Stop. It meant, that remote has been successfully erased. Next you need to clone your original remote: 1) Put both (ORIGINAL and CLONE) remotes Into "Back to Back position ( II )" or "Side-by-Side". Make sure they have direct contact , touching each other. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make : 2 blinks - 3 blinks- Steady = Successfully cloned, only after the light goes into steady. If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. Note: you don't need an access to you control board or receiver!!! PROGRAMMING VIDEO (side by side): https://www.youtube.com/watch?v=QrfIIFW8JgE or https://www.youtube.com/watch?v=D8An1As6KRs. Another PROGRAMMING VIDEO (back to back): https://www.youtube.com/watch?v=nwpfT9MhUww . If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.amazon.com/dp/B01MSRPVD2 . IF YOU HAVE ANY QUESTIONS ABOUT YOUR PURCHASE PLEASE CONTACT US!
  • Great value, High quality 433,92Mhz V2 compatible clone remote control!!!
  • Clones your V2 Phoenix2, Phoenix4, TXC2, TXC4, HANDY2, HANDY4, TSC2, TSC4, TRC2, TRC4, PHOX2, PHOX4 remote controls!!!
  • Fast cloning procedure. It clones within 10 seconds!!!
  • Small and compact design!!! Battery and keychain included!
  • Distance: Extra Long Range !!! Up to 100 meters!!! Even better quality, than original V2 remote !!!
Great value, High quality 433,92Mhz V2 compatible clone remote control!!!V2 replacement remote / clone

YOU MIGHT ALSO LIKE