THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2005-2016 Nissan Frontier
2005-2012 Nissan Pathfinder
2005-2016 Nissan Xterra

ADDITIONAL INFORMATION

• May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
• Simple, bolt-on installation with minimal tools
• Spacers are Made of Forged Billet T6 6061 Aluminum

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You Can Cut Your Existing Studs To The Correct Length

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 6x114.3
• Hub Bore: 82.5mm
• Thickness: Each Spacer Measure 1/4" Thick
• May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
• Simple, bolt-on installation with minimal tools

Vehicle Bolt Pattern: 6x114.3Titan Wheel Accessories