Specifications:

Image sensor: Color CMOS
TV system: NTSC default
Effective pixels: 728 x 512 Pixels
Sensing area: 5.961 x 4.276mm
Horizontal resolution: 420TVL
Electronic Shutter 1/60(NTSC)-1/10000S, 1/50(PAL)-1/10000S
Minimum illumination: Lens Angle: 170°
White balance: Auto
Color: Black
Waterproof: IP67-IP68
Video output: 1.0Vp-p,75ohm
Current Consumption: 90mA Max
Power supply: DC 12V
Operating Temperature: -20°C+80°C RH95%
Storage temperature: -30°C+80°C
Video cable length: 6m
Power supply cable length: 1.5m


Installation:

Take out your stock license plate light at the back of your car.
b. Fix the camera to where the stock license plate light was.
c. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
d. Connect the power of the camera to your Reverse lights - red wire to positive and black wire to negative.
e. Connect the video cable of the camera to the extension cord.
f. Connect the extension cord to your car monitor.
g. You will see the images when your car is in reverse shift.
IF it is possible we suggest that you should go to the 4S store for installing the kits.

Package Content:
1 x Car Rear View Camera
1 x Video Cable
1 x Power Cable

• Waterproof, IP67-IP68 , Can be used both in car and home.
• 170°wide viewing angle,horizontal resolution 420TVL, night vision, color CMOS image sensor, auto white balance, wide-angle 360o rotation.
• Applicable to variety of Vehicles: car, truck, RV, mini-van etc.
• Can help avoid incidents and accidents abrasion well.
• Compact design and easy to install.

Waterproof, IP67-IP68 , Can be used both in car and home.eshion