Type: Unshielded; Sensing method: Inductive type; Sensing distance: 5 mm-10% to +10%; Setting distance: 0 to 4 mm; Differential distance: 15% Max. of sensing distance; Sensing object: Ferrous metal (Sensitivity lowers with non-ferrous metals.); Standard sensing object Iron 30 x 30 x 1 mm; Power supply voltage: 12 to 24 VDC ripple(p-p) 10% Max.; Operating voltage range: 10 to 30 VDC; Current consumption: 8　mA　max.(at 12 VDC), 15 mA max. (at 24 VDC); Control output (Output type): NPN voltage-current output; Control output (Switching capacity): 0 to 100 mA(at 12 VDC), 0 to 200 mA(at 24 VDC); Control output (Residual voltage): 1 V Max.(under load current); Indicator: Detection indicator (red); Operation mode: NO; Protective circuit: Surge suppressor, Power supply reverse polarity protection; Standard or Different Frequency: Standard; Ambient temperature: Operating: -25 to 70 ℃; Storage: -25 to 70 ℃; Temperature influence: +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL (As the basis for sensing distance of 23 CEL); Voltage influence: +/- 2.5% Max. of sensing distance in rated voltage range +/- 10%. (As the basis for sensing distance at standard power voltage); Insulation resistance: 50 MOhm Min. at 500 VDC between charged parts and the case; Dielectric strength: 1000 VAC 50/60 Hz for 1 minute between charged parts and the case; Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions; Shock resistance: 500 m/s**2 for 10 times each in X, Y, and Z directions; Degree of protection: IEC60529: IP67; Company standard: Oil-proof; Connection method: Pre-wired models(Cable length: 2 m); Weight (Packed state): approx. 145 g; Material (case): Heat-resistant ABS resin; Material (sensing surface): Heat-resistant ABS resin; Accessories: Instruction manual, Mounting bracket

• Type: Unshielded
• Sensing Method: Inductive Type
• Sensing Distance: 5 mm-10% to +10%
• Setting Distance: 0 to 4 mm
• Operation Mode: NO

Type: UnshieldedOmron Corporation