THESE ADAPTERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2001-2012 Ford Escape
2006-2012 Ford Fusion
1993-1997 Ford Probe

1990-1995 Mazda 929
2016 Mazda CX-3
2013-2016 Mazda CX-5
2010-2012 Mazda CX-7
2007-2015 Mazda CX-9
1995-2002 Mazda Millenia
2006-2015 Mazda MX-5 Miata
2001-2006 Mazda Protege Sedan (5 lug only)
1989-1995 Mazda RX-7
2004-2011 Mazda RX-8
1999-2006 Mazda MPV
2001-2011 Mazda Tribute

2006-2011 Mercury Milan

2006-2016 Hyundai Azera
2007-2016 Hyundai Elantra
2009-2016 Hyundai Genesis
2010-2016 Hyundai Genesis Coupe
2009-2016 Hyundai Santa Fe
2006-2016 Hyundai Sonata
2003-2008 Hyundai Tiburon
2006-2016 Hyundai Tucson
2007-2016 Hyundai Veracruz
2001 Hyundai XG300
2002-2005 Hyundai XG350

2004-2009 Kia Amanti
2010-2016 Kia Forte
2006-2016 Kia Optima
2007-2010 Kia Rondo
2002-2016 Kia Sorento
2010-2016 Kia Soul
2005-2007 Kia Sportage (does not fit EX and LX Models)
2008-2016 Kia Sportage

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x4.5
• Hub Bore: 82.5mm
• Thread Pitch: 12x1.5
• Thickness: Each Spacer Measure 1.50" Thick

Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories