THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2011-2014 Chrysler 200
1999-2004 Chrysler 300M
1993-2004 Chrysler Concorde
1994-2001 Chrysler LHS
1995-2005 Chrysler Sebring Coupe
2007-2010 Chrysler Sebring
1996-2007 Chrysler Town & Country

1996-2014 Dodge Avenger
2007-2012 Dodge Caliber
1996-2007 Dodge Caravan
1993-2004 Dodge Intrepid
1991-1996 Dodge Stealth
2001-2005 Dodge Status Coupe

1991-1999 Mitsubishi 3000GT
1992-2004 Mitsubishi Diamante
1995-2012 Mitsubishi Eclipse
2004-2011 Mitsubishi Endeavor
1999-2012 Mitsubishi Galant
2003-2006 Mitsubishi Lancer (5 lug Evolution & Ralliart only)
2008-2016 Mitsubishi Lancer
2004-2016 Mitsubishi Outlander

1990-1994 Plymouth Laser

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the SPACERS, otherwise additional lugs WILL BE required
• Make sure that all SPACERS get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x4.5
• Hub Bore: 82.5mm
• Thread Pitch: 12x1.5
• Thickness: Each Spacer Measure 2" Thick

Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories