FITMENT(just for reference, please check the parameters for further confirm)

All the vehicle styles listed below is just for reference since there are difference between cars in different years and models. To confirm whether it fits, the most direct way is to check all the parameters(Bolt Pattern, Hub Bore Size, Thread Pitch). If your vehicle exactly has the same parameters, then it will fit, otherwise it maybe not fit.

2007-2014 Jeep Wrangler

1999-2010 Jeep Grand Cherokee

2006-2010 Jeep Commander

BEFORE ORDERING:

1. Please carefully check the parameters (including Bolt Pattern, Hub Bore Size, Thread Pitch) and make sure all these parameters fit your wheels before ordering.

2. Please ensure that the your vehicle has the same Studs as what's supplied with these wheel spacers, otherwise you will need to purchase the lug nuts for proper installation.

3. The bolt tail should be flush with the surface of wheel spacers, If your OEM studs are longer than the thickness of the spacers, there are several ways :

- Short Your lugs studs by grinding them down

- Or Replace your studs will shorter studs

- Or if you wheels have cavities in the backside, between the mounting holes, then it will be OK (make sure it is flush ).

INSTALLATION NOTES:

1. Installation should only be performed by a trained professional, failure to follow proper procedures may cause your lug nuts to come undone while driving! 

2. Make sure you get 6-8 FULL TURNS of the lug nuts before tightening. Meanwhile an Alignment is necessary after installation.

3. Avoid using an impact wrench; improper usage may cause damage to components.

4. Check and re-torque all lug nuts after 25-50 miles of driving.

5. No returns or exchange once installed.

• BEFORE ORDER: Please carefully CHECK the vehicle PARAMETERS (bolt pattern/ thread pitch/ hub bore) and make sure they are exactly the SAME as listed, otherwise it maybe not fit.
• 5 LUG WHEEL SPACERS - Bolt Pattern: 5x5''; Hub Bore Size: 71.5mm; Thickness: 1.5''; Thread Pitch: 1/2''x20
• SOLID & SAFE: The body of YITAMOTOR wheel adapters is made of aerospace grade 6061-t6 aluminum. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength and efficiently eliminate the risk of vibrations.
• BENEFITS: Widen your vehicle wheels base by allowing for a more aggressive stance, eliminate rubbing easily and instantly, greatly improve the vehicle stability! Box Packaged, bolt-on easy installation, save your time and money!

BEFORE ORDER: Please carefully CHECK the vehicle PARAMETERS (bolt pattern/ thread pitch/ hub bore) and make sure they are exactly the SAME as listed, otherwise it maybe not fit.LEDKINGDOMUS