THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

1976-1993 Dodge Ramcharger
1994-2001 Dodge Ram 1500
1996-2001 Dodge Ram 1500 Van

1963-1974 Ford F-100 Pickup
1977-1983 Ford F-100
1980-1996 Ford F-150
1980-1983 Ford E-100 Econoline
2003-2006 Ford E-150
1992-2002 Ford E-150 Econoline
1980-1996 Ford Bronco

1963-1966 Jeep CJ3
1964-1983 Jeep CJ5
1964-1975 Jeep CJ6
1976-1986 Jeep CJ7
1981-1985 Jeep Scrambler

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x5.5
• Wheel Bolt Pattern: 5x5.5
• Hub Bore: 108mm
• Thread Pitch: 1/2" x 20
• Thickness: Each Spacer Measure 1.25" Thick

Vehicle Bolt Pattern: 5x5.5Titan Wheel Accessories