2x 1.50
2x 1.50
30 Days Lowest Price Guarantee

2x 1.50" Wheel Spacers | 5x4.5 (5x114.3) | Fits Mitsubishi Chrysler Dodge Vehicles

$ 47.35

DESCRIPTION

THESE ADAPTERS WILL BOLT UP TO THE FOLLOWING VEHICLES
    2011-2014 Chrysler 200
    1999-2004 Chrysler 300M
    1993-2004 Chrysler Concorde
    1994-2001 Chrysler LHS
    1995-2005 Chrysler Sebring Coupe
    2007-2010 Chrysler Sebring
    1996-2007 Chrysler Town & Country

    1996-2014 Dodge Avenger
    2007-2012 Dodge Caliber
    1996-2007 Dodge Caravan
    1993-2004 Dodge Intrepid
    1991-1996 Dodge Stealth
    2001-2005 Dodge Status Coupe

    1991-1999 Mitsubishi 3000GT
    1992-2004 Mitsubishi Diamante
    1995-2012 Mitsubishi Eclipse
    2004-2011 Mitsubishi Endeavor
    1999-2012 Mitsubishi Galant
    2003-2006 Mitsubishi Lancer (5 lug Evolution & Ralliart only)
    2008-2016 Mitsubishi Lancer
    2004-2016 Mitsubishi Outlander

    1990-1994 Plymouth Laser



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  • Your lugs studs will need to be shortened by grinding them down
  • You can replace your studs will shorter studs
  • if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


  • ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

    • Vehicle Bolt Pattern: 5x4.5
    • Wheel Bolt Pattern: 5x4.5
    • Hub Bore: 82.5mm
    • Thread Pitch: 12x1.5
    • Thickness: Each Spacer Measure 1.50" Thick
    Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories

    YOU MIGHT ALSO LIKE