THESE ADAPTERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2001-2003 Acura CL
2013-2016 Acura ILX
1997-2001 Acura Integra Type R Hatchback 3dr
1991-1995 Acura Legend
2001-2006 Acura MDX
2001-2005 Acura NSX
2007-2016 Acura RDX
1996-2004 Acura RL
1996-2008 Acura TL
2015-2016 Acura TLX
2004-2014 Acura TSX

1998-2016 Honda Accord
2004-2016 Honda Civic
1997-2016 Honda CR-V
2011-2016 Honda CR-Z
2003-2011 Honda Element
2003-2008 Honda Pilot
2000-2009 Honda S2000

2007-2016 Jeep Compass
2007-2016 Jeep Patriot

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x4.5
• Hub Bore: 82.5mm
• Thread Pitch: 12x1.5
• Thickness: Each Spacer Measure 1.50" Thick

Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories