This universal 433.92Mhz rolling / fixed code 2-channel receiver 100% compatible with EcoStar remote controls. The 2 channels allows you to operate 2 different garage gates and /or other electronics using your original EcoStar RSC2, EcoStar RSE2 remote control. Parameters: • 433.92Mhz rolling / fixed code frequency • 2-channel receiver • Memory: Up to 400 remotes!! INSTRUCTIONS FOR PROGRAMMING RECEIVER: Learning new remotes: Press "learn 1" or "learn 2" button - Learn LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start blinking and go off - This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory--> Press "learn 1" or "learn 2" and keep holding until Learn LED will go off - Once Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. HOW TO CONNECT YOUR RECEIVER: Connect 2 wires of CH1 or CH2 to your control board between: 1) COM and N/O, 2) COM and P/P (Push button) in parallel to Push button. All you need to do is to connect this receiver to your control board by using only 4 wires (2 - for power; 2 - for relay!!!) Note: The abriviations of your board can be different, so follow your manual. VIDEO INSTRUCTIONS FOR PROGRAMMING RECEIVER: https://www.youtube.com/watch?v=NfpZvDAadWU&feature=youtu.be . If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.amazon.com/dp/B01MSRPVD2 . IF YOU HAVE ANY QUESTIONS ABOUT YOUR PURCHASE PLEASE CONTACT US!

• Universal 2-channel 12-24V AC/DC receiver
• Can be programmed with: EcoStar RSC2, EcoStar RSE2 remote controls!!!
• Frequency: 433.92Mhz fixed / rolling code!!!
• Range: Up to 100 - 200 meters!!!
• Memory up to 400 remotes!!!

Universal 2-channel 12-24V AC/DC receiver2-channel universal receiver