THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2008-2012 Infiniti EX35
2012-2013 Infiniti EX35
2003-2012 Infiniti FX35
2012-2013 Infiniti FX37
2009-2013 Infiniti FX50
2003-2008 Infiniti FX45
2011-2012 Infiniti G25
2003-2008 Infiniti G35
2008-2013 Infiniti G37
2006-2010 Infiniti M35
2012-2013 Infiniti M35H
2011-2013 Infiniti M37
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
2011-2013 Infiniti M56
2014-2016 Infiniti Q50
2014-2016 Infiniti Q50s
1997-2003 Infiniti QX4
2014-2016 Infiniti QX50
2014-2016 Infiniti QX60
2014-2016 Infiniti QX70

1995-1998 Nissan 240SX (Will NOT fit base models)
1987-1996 Nissan 300ZX
2003-2009 Nissan 350Z
2009-2016 Nissan 370Z
2002-2016 Nissan Altima
2009-2016 Nissan GT-R
2014-2016 Nissan Juke
2011-2016 Nissan Leaf
2007-2012 Nissan Sentra SE-R Spec V
2013-2016 Nissan Sentra
1995-2016 Nissan Maxima
2003-2016 Nissan Murano
2014-2016 Nissan Pathfinder
2008-2016 Nissan Rouge

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x4.5
• Hub Bore: 66.1mm
• Thread Pitch: 1/2" x 20
• Thickness: Each Spacer Measure .8" Thick

Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories