2pc 20mm (.8) 5x112 Wheel Spacers - for VW AUDI Mercedes Hubcentric Billet 66.56mm Hub Bore
2pc 20mm (.8) 5x112 Wheel Spacers - for VW AUDI Mercedes Hubcentric Billet 66.56mm Hub Bore
30 Days Lowest Price Guarantee

2pc 20mm (.8) 5x112 Wheel Spacers - for VW AUDI Mercedes Hubcentric Billet 66.56mm Hub Bore

$ 36.75

DESCRIPTION

THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES
    2009-2015 - Audi - A4/S4
    2009-2015 - Audi - A5/S5

    MERCEDES:

    1994-2000 W202 C Class C220, C230, C280, C43 AMG
    2002-2007 W203 C Class C230, C240, C320, C32 AMG, C55 AMG (Rear Only)
    2008-2011 W204 C Class C300, C350, C63 AMG
    2000-20011 W215 & W216 CL Class CL500, CL600, CL63 AMG, CL65 AMG (Rear Only)
    1997-2009 W208 & W209 CLK Class CLK320, CLK350, CLK430, CLK500, CLK550, CLK55 AMG (Rear Only)
    2004-2010 W219 CLS Class CLS320, CLS350, CLS500, CLS550 (Rear Only)
    1996-2002 W210 E Class E320, E420, E430, E55 AMG
    2003-2009 W211 E Class E320, E350 (Rear Only)
    2000-2012 W212 E Class E350, E500
    2000-2005 W220 S Class S320, S400, S420, S500, S600
    2006-2010 W221 S Class S320, S350, S450, S600, S63 AMG (Rear Only)
    1994-2002 R129 SL Class SL320, SL500, SL600 2003-2010 - R230 - SL Class - SL500, SL600, SL550, SL55 AMG, SL65 AMG (Rear Only)
    1997-2003 R170 SLK Class SLK230, SLK320
    2004-2010 R171 SLK Class SLK280, SLK350, SLK55 AMG (Rear Only)



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  • Your lugs studs will need to be shortened by grinding them down
  • You can replace your studs will shorter studs
  • if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


  • ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

    • Vehicle Bolt Pattern: 5x112
    • Hub Bore: 66.56mm
    • Thickness: Each Spacer Measure .8 Thick
    • Will NOT WORK with stock length studs. Extended Wheel Studs are ABSOLUTELY NEEDED for proper installation
    • Hubcentric Wheel Spacers with Wheel-Centric Lip. This means it will fit perfectly over your hub - eliminating possibility of vibrations. Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers
    Vehicle Bolt Pattern: 5x112Titan Wheel Accessories

    YOU MIGHT ALSO LIKE