THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2001-2004 Acura CL
2014-2016 Acura ILX
1997-2001 Acura Integra Type R
1991-2005 Acura NSX (Rear Axle ONLY)
2001-2006 Acura MDX 2014-2016 Acura MDX 2007-2016 Acura RDX 1996-2004 Acura RL
2002-2006 Acura RSX
1999-2008 Acura TL
2015-2016 Acura TLX
2004-2014 Acura TSX

1998-2016 Honda Accord
2006-2015 Honda Civic
2010-2015 Honda Crosstour 1997-2016 Honda CR-V
2011-2016 Honda CR-Z
2003-2011 Honda Element
2013-2016 Honda Fit
1995-2004 Honda Odyssey
2016 Honda HR-V
1997-2002 Honda Prelude
2003-2008 Honda Pilot
2000-2008 Honda S2000 (Rear Axle ONLY)

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x4.5
• Hub Bore: 64.1mm
• Thread Pitch: 12x1.5
• Thickness: Each Adapter Measure .8" Thick

Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories