30 Days Lowest Price Guarantee
(2) 1/4" 6x135 Wheel Spacers for Ford F150 Trucks Expedition .5" Raptor King Ranch
DESCRIPTION
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
ADDITIONAL INFORMATION
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- 2003-2016 Ford Expedition
2004-2016 Ford F150
2003-2016 Lincoln Navigator
ADDITIONAL INFORMATION
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
- Vehicle Bolt Pattern: 6x135
- Hub Bore: 108mm
- Thickness: Each Spacer Measure 1/4" Thick
- May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
- Simple, bolt-on installation with minimal tools